Length: 39.67"-41.67" / 100,8-105,8 cm depending on end pieces.
Width: 10.0" / 25,4 cm
Weight: 7,6 lbs / 3,45 kg (Option is 9.3 lbs / 4,2 kg)
Inner hole wheelbase(s): 32.0"-34.0" / 81,3-86,4 cm depending on end pieces.
Truck mounting pattern: Old school

This downhill board uses a modular system consisting of two end pieces that bolt to a standing platform. It can be delivered with any combination of two of the end pieces available. Extra ends can be purchased to expand the versatility of this downhill board.

The end pieces are available in standard, 0.5" shorter, 0.75" shorter and 1.0" shorter lengths. Depending on the specific truck and wheel being used, the wheel to deck clearance and the actual wheelbase (wheel to wheel) can be adjusted to suit the rider.

Wedged end pieces are available with 5, 7 or 10 degree wedging. The ends can be used in the front or rear and can be used to add or remove steering angle depending on the mounting direction.

The ends allow for regular truck mounting or drop through mounting. Cover plates are supplied for use when truck is not dropped through. A variety of spacers for the trucks and deck are supplied so the ride height and rake can be precisely adjusted.

The boards come gripped and include: truck mounting hardware, truck drop spacers, board drop spacers, cover plates and all the necessary hardware to assemble it.